چکیده

BACHGROUND: A magnetic Fe3O4/powder activated carbon (Fe3O4/PAC) composite was easily fabricated as a hybrid adsorbent for the simultaneous removal of Pb(II) and aniline (An) from synthetic wastewater. SEM, EDX, VSM, BET, TEM and XRD analyses were employed for the composite characterization. The adsorption experiments in a batch mode were conducted through evaluation of the factors affecting the adsorption process (i.e. pH, contact time, different adsorbent and adsorbate concentrations, and temperature). RESULTS: The Adsorption of both contaminants followed the pseudo-second-order kinetics. According to the Langmuir isotherm the maximum Pb(II) and An sorption capacities at pH 6.0 were found to be 94.3 and 206.6 mg/g, respectively. A comparative study on the performance of the adsorption process in both single and simultaneous systems revealed that the presence of Pb(II) and An together had synergic effects on the adsorption efficiency. Moreover, the adsorbent performance in the presence of two pollutants compared with each of them alone has not diminished. CONCLUSION: Fe3O4/PAC shows a simple and easy regeneration and good potential reusability, and its adsorption efficiency was preserved effectively even after four successive cycles of use. Finally, Fe3O4/PAC could be considered as an excellent conducting material for the treatment of metal ions and organic pollutants.

کليدواژه ها

Adsorption،Aniline، Lead، Magnetic separation، Activated carbon، Simultaneous removal

کد مقاله / لینک ثابت به این مقاله

برای لینک دهی به این مقاله، می توانید از لینک زیر استفاده نمایید. این لینک همیشه ثابت است :

نحوه استناد به مقاله

در صورتی که می خواهید در اثر پژوهشی خود به این مقاله ارجاع دهید، به سادگی می توانید از عبارت زیر در بخش منابع و مراجع استفاده نمایید:
, 1398 , پ , نهمین کنفرانس بین المللی توسعه پایدار و عمران شهری